Good Job!!!

I have a question:
Were I find a help file to explain and educate me with details the overall use of your programme ?
Thanks in advance
Kimon.

Unfortunately, the guest book is very inconvenient tool for technical support. Please contact by email. All OFF-topic messages will be deleted.

I just started using your tool, I produced my first .img file from a .mp but I found that all points are moved up to 10 meter from the original position and also that polylines are approximated with a fewer points,
Is this a limitation of the shareware?
What are the differences in the licensed tool?
Than you
Giuseppe

Will you add Garmin bluechart export to the mapedit in the future. would be very valuable in combination with oziexplorer 3d.
Neal

How to change the comm port in MapEdit

Sorry for not make my question clearly.
Let say if I draw a line which represent a road and the color of the line shows how is the traffic''s status of the road(Red mean traffic conjested, Green means fine). The road traffic''s data can be in text file of database.
Is there anyway the program can read the new data from the text file or database for update and refresh the color of the line in the map in every certain timeframe?
Thanks in advance.

Good Job!!!

I have a question:
Is there anyway to refresh the data every certain second, for example, refresh in 60 seconds...
Thanks in advance

Thanks for creating GPSMapEdit!!!!!
I''m editing some custom-maps to my convenience, and it''s great.
The program is very useful!!
Congratulations
Marcos.

Good Job!!!

I have a question:
Is there anyway to join 2 polylines so that they become one polyline?
Thanx in advances

Good Job.
I have downloaded the GdiPlus.dll to load image data.
I''m trying to load ETOPO .map files png images, they load when I turn down colour depth 16 bit vrs 32 bit the image loads.
Question is I just get a Grey square where the etopo .map should be. your program reads all of the file loads then displays a grey box and ideas??

I use surfer (by Golden Software) to make fishing maps based on depth data that I collect. Can Surfer maps or files that Surfer export be converted to img files? Surfer can export file types:
Export Format Types

Metafile
Windows Picture (Enhanced) EMF
Windows Picture WMF
Windows Clipboard (picture) CLP
Computer Graphics Metafile CGM
AutoCAD DXF
Bitmap
Tagged Image (TIFF) TIF
Windows Bitmap BMP
Targa (True Vision) TGA
PCX (ZSoft/Paintbrush) PCX
WordPerfect Bitmap WPG
JPEG Compressed Bitmap JPG
CompuServe Bitmap GIF
PICT (MacIntosh) Bitmap PCT
DCX (Multi-page PCX) DCX
Portable Network Graphics Bitmap PNG
ESRI Shapefile SHP
Atlas Boundary BNA
Golden Software Blanking BLN
MapInfo Interchange Format MIF
Golden Software Interchange GSI
Golden Software Boundary GSB
Others can be requested.

Great Program, keep up the good work!!

How do I split, merge and remove unwanted points in tracks or polylines?

Thanks in anticipation

Thanks for your reply to my earlier post.

I noticed when I open a previously edited saved source file and re-save without doing any changes, the two files are not identical! See attached

Original:
[RGN40]
Type=0x6
Label=Yis St 20
Data0=(1.43622,103.83579),(1.43517,103.83622)
[END-RGN40]

Saved:
[RGN40]
Type=0x6
Label=Yis St 20
Data0=(1.43622,103.83580),(1.43517,103.83622)
[END-RGN40]

In this particular case there are 22 changes reported.

However if you open the "re-saved" file and save again there are no differences.

best regards,

Hi, I own a non-mapping GPS (Garmin GPS 72). I wonder if I can use your SW for changing the preloaded POI database. I loaded in the GPS the D005901A.rgn (got from Garmin site) but I''d like to modify it (navaids are very "approximate"). Your SW seems capable to read .rgn but not able to save in .rgn format. How can I do?

Thanks in advance.

When trying to open blue chart img files it is just blank even if zooming. is it possible to open and edit blue chart files.

Great software, yeah!. I have problems with the color of the filled areas and color and width of the polylines. There is no relation between what one sees in MapEdit, MapSource and my Garmin 60CS.

Has it solution?

Thank you

Hi again Konstantin.
This is Alberto from Mexico again

Do you have plans to integrate sendmap to GPSMapEdit? It would be a good idea to develop an integrate a GUI to use sendmap in a much easier way than with the current options. The GUI shown here
http://vip.hyperusa.com/~dougs/GPSSM/index.html
is not estable and does not work with every OS.

Greetings and keep on with your great work.

First a big thank you for a great software.
I know this have been asked before, how do you join two polylines?
You can accidentally moved an object or polyline without knowing it with the select tool.
Any way to prevent it?

Есть ли возможность купить у вас карту векторную готовую чеховского района? (направление Стремилово - Бегичево). Масштаб 500м. Цель - неделю назад купил Garmin, также карту от Навиком Москвы и Московской области. Но на ней нет ни лесов, ни рек, ни озер (точнее реки и озера есть, но криво отображены).
Очень активно катаюсь на велосипеде, поэтому хотелось бы действительно подробную карту! С Лесами с
Болотами с Реками С Озерами!!! (это крик души)!
Буду безумно благодарен за помощь!

Если есть Владимирская область, район Петушки - Костерево - Болдино, Это вообще мечта!

Great software, I have access to AutoCAD and MicroStation, is there a way to bring data from those programs to your software? I have a lot of maps in vector format (DGN, DWG, DXF) that would not have to be retraced.
When is the DXF Import option planned?